|
SUNDANCE® Spas Transformers
|
 |
|
|
|
SUNDANCE® Spas Systems Transformers. The most widely used is the 6560-274. The reason we do not
sell it with the connectors is that the configuration changed several times over
the years. Where is the transformer? On many models, it was installed on the
back side of the plywood that the System is mounted to. You will see 2 "white"
molex plugs plugged into the circuit board and the lines feed out to the
transformer.
|
|
|
|
|
|
|
SUNDANCE® Spas Terminal Blocks and Power Cords
|
|
|
|
|
SUNDANCE® Spas Terminal Blocks and Power Cords: Terminals blocks used on all systems for electrical terminal connection. Power Cords were used on all 120 Volt Power Systems.
|
|
|
|
|
|
|
SUNDANCE® Spas Panel Lights
|
|
|
|
|
|
SUNDANCE® Spas
Panel Lights: Panel lights were used for correct polarity hook up
on spa installation and power lights for system activation. Used only
on older models such as 600, 700 Series and some early 800 Series
|
|
|
|
|
|
|
SUNDANCE® Spas Fuses, Breakers and Fuse Holders
|
|
|
|
|
SUNDANCE® Spas Fuses, Breakers and Fuse Holders: Electrical fuses used on all Sundance and Sweetwater systems. Fuses are used on: Main Power, Pumps, Blowers, Transformers.
|
|
|
|
|
|
|
SUNDANCE® Spas Contactors and Relays
|
|
|
|
|
|
SUNDANCE® Spas Contactors and Relays used on Heater and Pump Systems.
|
|
|
|
