You are here: Home > Pumps, Motors and Components > SUNDANCE® Spas Pumps, Aqua-Flo "XP" Pumps, 1997-1998

Aqua-Flo "XP" Series Pump was used during this time period and was phased into the Theramax, Theraflo Series. No longer available in the configuration used by Sundance, we have the upgrade from Sundance to retrofit your spa.

Sundance used 48 and 56 Frame motors in this time period, please note you need to find which one you have. Determining whether your motor is a 48 or 56 Frame Motor. The spa and pool industry use various "Frame" sizes to mount their "wet end" or pump to. A bracket mount motor has a welded base for mounting. These motors can be a 48 or 56 Frame. Other types of motors such as the "C" Frame or Round Face and the Square Flange are all 56 Frame. There are several ways to figure out the Frame size. One is to look at the spec sheet where it says Frame (FR) it might have some letters with it but will have 48 or 56 as the frame size. The other way to determine is to measure the thru bolts (the 4 bolts that run thru the length of the motor and screw onto the wet end or volute of the pump). Measure the distance between the thru bolts, DO NOT measure diagonally but from one bolt to the next bolt. 48 FRAME distance between the 2 bolts is 3 5/8 inch 56 FRAME distance between the 2 bolts is 4 1/8 inch Because all manufactures do not call all things the same this is the best way to tell the Frame size. PLEASE NOTE: AQUA-FLO FMXP FRAME Wet ends, have two different sizes. They used 2 different motor manufactures, Emerson and Magnetek which are different sizes: EMERSON MOTORS: Distance between the 2 bolts is 4 inch MAGNETEK MOTORS: Distance between the 2 bolts is 4 1/8 inch

Sort By:

SUNDANCE® Spas, JACUZZI® Spas, Sweetwater Spas Wet Wet End 1.5 Hp

List Price: $185.85
Our Price: $95.85

Complete SUNDANCE® Spas, JACUZZI® Spas, Sweetwater Spas Wet End for 1.5 Hp Pumps.
Contains: front and rear housing, 1.5 Hp impeller, o-ring, seal and screws. All you need to do is install it onto the original motor. Must be a 48 Frame Pump which Sundance used on 1998-2005.
Current Replacement pump wet end for these old part numbers: 6500-122, 6500-135, 6500-259, 6500-258, 6500-293, 6500-759, 6500-758, 6500-793, 6500-345.

91041622, Aqua-Flo Wet End, 2.0 HP, 56 Frame FMXP2

Our Price: $98.85

Aqua-Flo Wet End, 2.0 HP 2", 6.1"Dia. 56 Frame FMXP2

Fits Emerson Motors Only! Measurement between thru bolts: 4 inches ( please see: Determining whether your motor is a 48 or 56 Frame Motor.)

Used in Sundance Theramax II Pumps 1997-1999

Determining whether your motor is a 48 or 56 Frame Motor.

The spa and pool industry use various "Frame" sizes to mount their "wet end" or pump to. A bracket mount motor has a welded base for mounting. These motors can be a 48 or 56 Frame.

Other types of motors such as the "C" Frame or Round Face and the Square Flange are all 56 Frame.

There are several ways to figure out the Frame size. One is to look at the spec sheet where it says Frame (FR) it might have some letters with it but will have 48 or 56 as the frame size.

The other way to determine is to measure the thru bolts (the 4 bolts that run thru the length of the motor and screw onto the wet end or volute of the pump). Measure the distance between the thru bolts, DO NOT measure diagonally but from one bolt to the next bolt.

48 FRAME distance between the 2 bolts is 3 5/8 inch

56 FRAME distance between the 2 bolts is 4 1/8 inch

Because all manufactures do not call all things the same this is the best way to tell the Frame size.

PLEASE NOTE: AQUA-FLO FMXP FRAME Wet ends, have two different sizes. They used 2 different motor manufactures, Emerson and Magnetek which are different sizes:

EMERSON MOTORS: Distance between the 2 bolts is 4 inch

MAGNETEK MOTORS: Distance between the 2 bolts is 4 1/8 inch

91041623, Aqua-Flo Wet End, 2.5 HP, 56 Frame FMXP2

Our Price: $98.85

Aqua-Flo Wet End, 2.5 HP 2", 6.1"Dia. 56 Frame FMXP2

Fits Emerson Motors Only! Measurement between thru bolts: 4 inches ( please see: Determining whether your motor is a 48 or 56 Frame Motor.)

Used in Sundance Theramax II Pumps 1997-1999

Determining whether your motor is a 48 or 56 Frame Motor.

The spa and pool industry use various "Frame" sizes to mount their "wet end" or pump to. A bracket mount motor has a welded base for mounting. These motors can be a 48 or 56 Frame.

Other types of motors such as the "C" Frame or Round Face and the Square Flange are all 56 Frame.

There are several ways to figure out the Frame size. One is to look at the spec sheet where it says Frame (FR) it might have some letters with it but will have 48 or 56 as the frame size.

48 FRAME distance between the 2 bolts is 3 5/8 inch

56 FRAME distance between the 2 bolts is 4 1/8 inch

Because all manufactures do not call all things the same this is the best way to tell the Frame size.

PLEASE NOTE: AQUA-FLO FMXP FRAME Wet ends, have two different sizes. They used 2 different motor manufactures, Emerson and Magnetek which are different sizes:

EMERSON MOTORS: Distance between the 2 bolts is 4 inch

MAGNETEK MOTORS: Distance between the 2 bolts is 4 1/8 inch

91041825-000, Aqua-Flo Wet End, 2.5Hp, 48 Frame. XP2/XP2E

Our Price: $98.85

91041825-000, Aqua-Flo Wet End, 2.5Hp. Aqua-Flo Wet End, 2"MBT Side Discharge, 48 Frame. Fits Magnetek Motors and others. Also used for 2 Hp pumps 48 Frame (old part number 91041820-000)

The original is discontinued, replaced by this item: 91041825-000. Replacement for:91041611

For 48 Frame Pumps ONLY! If your pump says 56 Frame, you must order the 56 Frame Wet End. See Info below:

Determining whether your motor is a 48 or 56 Frame Motor.

The spa and pool industry use various "Frame" sizes to mount their "wet end" or pump to. A bracket mount motor has a welded base for mounting. These motors can be a 48 or 56 Frame.

Other types of motors such as the "C" Frame or Round Face and the Square Flange are all 56 Frame.

There are several ways to figure out the Frame size. One is to look at the spec sheet where it says Frame (FR) it might have some letters with it but will have 48 or 56 as the frame size.

48 FRAME distance between the 2 bolts is 3 5/8 inch

56 FRAME distance between the 2 bolts is 4 1/8 inch

Because all manufactures do not call all things the same this is the best way to tell the Frame size.

PLEASE NOTE: AQUA-FLO FMXP FRAME Wet ends, have two different sizes. They used 2 different motor manufactures, Emerson and Magnetek which are different sizes:

EMERSON MOTORS: Distance between the 2 bolts is 4 inch

MAGNETEK MOTORS: Distance between the 2 bolts is 4 1/8 inch

91041820-000, Aqua-Flo XP Wet End, 2Hp, 48 Frame

91041820-000, Aqua-Flo XP Wet End, 2Hp, 48 Frame

Our Price: $98.85

91041820, Aqua-Flo Wet End, 2Hp, 2"MBT Side Discharge. 48 Frame. This part is discontinued, the new part will retrofit as a complete wet end:

Old part number: 91041610 (discontinued)New part number: 91041820-000

Wet End 2.0HP XP2E 48-Frame

Determining whether your motor is a 48 or 56 Frame Motor.

The spa and pool industry use various "Frame" sizes to mount their "wet end" or pump to. A bracket mount motor has a welded base for mounting. These motors can be a 48 or 56 Frame.

Other types of motors such as the "C" Frame or Round Face and the Square Flange are all 56 Frame.

There are several ways to figure out the Frame size. One is to look at the spec sheet where it says Frame (FR) it might have some letters with it but will have 48 or 56 as the frame size.

48 FRAME distance between the 2 bolts is 3 5/8 inch

56 FRAME distance between the 2 bolts is 4 1/8 inch

Because all manufactures do not call all things the same this is the best way to tell the Frame size.

PLEASE NOTE: AQUA-FLO FMXP FRAME Wet ends, have two different sizes. They used 2 different motor manufactures, Emerson and Magnetek which are different sizes:

EMERSON MOTORS: Distance between the 2 bolts is 4 inch

MAGNETEK MOTORS: Distance between the 2 bolts is 4 1/8 inch

BN-51 Motor, 2/2.5 HP 2 Speed 220Volt

Our Price: $310.00

Century Flex-48® Spa&Tub Motor

Two Speed with Stand, Threaded Shaft, Thru Bolts 2HP, 220Volts, 10.5Amps, 1.00SF Identical to: SDS1202 1-20-0005 AOSBN51 5266DX 015-0057 182912

48 Frame Two Speed with Stand, Threaded Shaft, Thru Bolts 2/2.5HP, 220Volts, 10.5Amps
Motor replaces: All Sundance 2/2.5 HP 2 Speed, 240 Volt. Pumps from 1999-2010 with 48 Frames (excludes 2005+ 880 Series)

DO NOT USE WITH: 91041622, 91041623 Wet Ends

Aqua-Flo Flo-Master XP/XP2 Pump , 2.0Hp, 230v, 2-speed, 1997-1998 Sundance)

Our Price: $328.85

06120000-1040, Aqua-Flo Flo-Master XP/XP2 Pump , 2.0Hp, 230v, 2-speed


	1

Join our mailing list!

Aqua-Flo Wet End, 2.0 HP 2", 6.1"Dia. 56 Frame FMXP2

Fits Emerson Motors Only! Measurement between thru bolts: 4 inches ( please see: Determining whether your motor is a 48 or 56 Frame Motor.)

Used in Sundance Theramax II Pumps 1997-1999

Aqua-Flo Wet End, 2.5 HP 2", 6.1"Dia. 56 Frame FMXP2

Fits Emerson Motors Only! Measurement between thru bolts: 4 inches ( please see: Determining whether your motor is a 48 or 56 Frame Motor.)

Used in Sundance Theramax II Pumps 1997-1999

Wet End 2.0HP XP2E 48-Frame