|
SUNDANCEŽ Spas Circulation Pumps
|
 |
|
|
|
Beginning about the mid 90's, SUNDANCEŽ Spas went to a Circulation Pump System which they called, "Permaclear". They first used Grundfos Pumps then went to Laing Pumps. The current Sundance Spas Circulation Pumps is the latest generation on the Laing pump made for SUNDANCEŽ Spas and JACUZZIŽ Spas. From 2005+ SUNDANCEŽ Spas is using an Aqua-Flo Circulation Pump on the 880 Series.
|
|
|
|
|
|
|
SUNDANCEŽ Spas Theramax, Theraflo, Jacuzzi Pump Components 1999-2010
|
|
|
|
|
|
Sundance Theramax, Theraflo, Jacuzzi Spa Pump Components 1999-2010
Components for the Jacuzzi and Sundance Theraflo, Theramax Pumps. 1999-2010.
Determining whether your motor is a 48 or 56 Frame Motor.
The spa and pool industry use various "Frame" sizes to mount their "wet end" or pump to. A bracket mount motor has a welded base for mounting. These motors can be a 48 or 56 Frame.
Other types of motors such as the "C" Frame or Round Face and the Square Flange are all 56 Frame.
There are several ways to figure out the Frame size. One is to look at the spec sheet where it says Frame (FR) it might have some letters with it but will have 48 or 56 as the frame size.
The other way to determine is to measure the thru bolts (the 4 bolts that run thru the length of the motor and screw onto the wet end or volute of the pump). Measure the distance between the thru bolts, DO NOT measure diagonally but from one bolt to the next bolt.
48 FRAME distance between the 2 bolts is 3 5/8 inch
56 FRAME distance between the 2 bolts is 4 1/8 inch
Because all manufactures do not call all things the same this is the best way to tell the Frame size.
PLEASE NOTE: AQUA-FLO FMXP FRAME Wet ends, have two different sizes. They used 2 different motor manufactures, Emerson and Magnetek which are different sizes:
EMERSON MOTORS: Distance between the 2 bolts is 4 inch
MAGNETEK MOTORS: Distance between the 2 bolts is 4 1/8 inch
|
|
|
|
|
|
|
SUNDANCEŽ Spas Pumps 1997+
|
|
|
|
|
|
Sundance Spas Factory Pumps 1994-2010
New Pumps that retrofit back to 1994. The New Pumps come with a separate Motor Bracket that mounts to the equipment bay and allows the pump to be turned for proper alignment.
|
|
|
|
|
|
|
SUNDANCEŽ Spas Pumps, Aqua-Flo "XP" Pumps, 1997-1998
|
|
|
|
|
|
Aqua-Flo "XP" Series Pump was used during this time period and was phased
into the Theramax, Theraflo Series. No longer available in the configuration
used by Sundance, we have the upgrade from Sundance to retrofit your spa.
Sundance used 48 and 56 Frame motors in this time period, please note you need to find which one you have.
Determining whether your motor is a 48 or 56 Frame Motor.
The spa and pool industry use various "Frame" sizes to mount their "wet end" or pump to. A bracket mount motor has a welded base for mounting. These motors can be a 48 or 56 Frame.
Other types of motors such as the "C" Frame or Round Face and the Square Flange are all 56 Frame.
There are several ways to figure out the Frame size. One is to look at the spec sheet where it says Frame (FR) it might have some letters with it but will have 48 or 56 as the frame size.
The other way to determine is to measure the thru bolts (the 4 bolts that run thru the length of the motor and screw onto the wet end or volute of the pump). Measure the distance between the thru bolts, DO NOT measure diagonally but from one bolt to the next bolt.
48 FRAME distance between the 2 bolts is 3 5/8 inch
56 FRAME distance between the 2 bolts is 4 1/8 inch
Because all manufactures do not call all things the same this is the best way to tell the Frame size.
PLEASE NOTE: AQUA-FLO FMXP FRAME Wet ends, have two different sizes. They used 2 different motor manufactures, Emerson and Magnetek which are different sizes:
EMERSON MOTORS: Distance between the 2 bolts is 4 inch
MAGNETEK MOTORS: Distance between the 2 bolts is 4 1/8 inch
|
|
|
|
|
|
|
SUNDANCEŽ Spas Pumps, Vico Pumps, 1994 - 1996
|
|
|
|
|
|
Vico Pumps were called, "Ultima" or "Ultima Plus" on the Sundance Series
during this time period.
|
|
|
|
|
|
|
SUNDANCEŽ Spas Pumps, Hayward LX Pumps, 1990-1994
|
|
|
|
|
|
Hayward LX Pumps were used by Sundance on the 400 and 600 Series Pumps. We carry a replacement pump for this Series.
|
|
|
|
|
|
|
SUNDANCEŽ Spas Pumps, Hayward 3500 Pumps, 1993-1995
|
|
|
|
|
|
Hayward 3500 Series Pump used in 1993-1995 Sundance 800 Systems. No longer
available as a complete Pump, but all parts to rebuild are available.
|
|
|
|
|
|
|
SUNDANCEŽ Spas Pumps, Pac Fab Pumps 1989-1993
|
|
|
|
|
|
No longer available as complete pump
|
|
|
|
|
|
|
SUNDANCEŽ Spas Pumps, Sta-Rite Maxi-Glas, Dura-Glas Pumps, 1984-1989
|
|
|
|
|
|
Used in 601-605 Systems. This is a 120 Volt, 2 Speed Pump designed for
Sundance only by Sta-Rite
|
|
|
|
