6600-288 Rev. 3.57+ Circuit Board used on the following SUNDANCEŽ Spas, Sweetwater Spas:
6600-288 Circuit Board is for the following Sundance and Sweetwater Spas models:
A. 2008+ 1-pump 680 Burlington model equipped with a circulation pump
B. 2007+ 680 Hartford and Hawthorne models Equipped with a Circulation Pump
C. 2007+ 780 Hamilton, Chelsee, Certa and Camden (1-pump)
D. 2005-2006 780 Series Sundance Spas (Palermo, Bahia, Cayman)
E. 2003-2005 Sweetwater Board (Palermo, Bahia, and Cayman)
F. Replaces the 6600-087and 6600-088 Board 3.56, for circulation pump systems.
If your system has a 6600-087 and the eprom chip that begins with a 5 (such as REV 5.54), then you have a 6600-287 board.
2002+ JACUZZIŽ Spas Circuit Board for:
J-300 Series LED Circuit Board 6600-288 is for following models:
1. 2002-2006 J-335, J-345, 2005-2006 J-325
2. 2002-2003 J-325,
3.2007 J-325 (240 Volt Model). As of 2007 the J-300 Series are all LED models.
4. 2007+ J-365, J-355, J-345, J-335
5. 2008+ J-375
This board (6600-288) is for circulation pump systems (see 6000-125 for circulation pump).
Comes with a Series 3.56 chip.If your circuit board has a Software
Chip that begins with a 3, then this is the correct series board.
Sundance has revised this chip several times, we send you the board with
the current chip of 3.57. If you have an older board without a
Circulation pump, then you need a board with a Series Chip that starts
with a 5.
If you have an older board WITHOUT a Circulation pump (see 6000-125 for picture of circulation pump), then you need a board with a Series Chip that starts with a 5. This would be a 6600-287 board.
ALL 6600-287, 6600-087 boards (without circulation pump logic, Chip
5.54)and 6600-288, 6600-088 (with Circulation Pump Logic, Chip 3.56 or
higher)are identical but use different micro chips.
